Semiautomatic Rj45 Wire Crimping Machine,RJ45 RJ11 RJ12 Cable Crimper,4p ~8p10c

Description

Semiautomatic Rj45 Wire Crimping Machine, RJ45 RJ11 RJ12 Cable Crimper, 2p ~8p10c
Crystal head riveting machine, high stability, pressure of about 800 per hour!
Pressure crystal head machine can press 4p2c 4p4c 6p6c 6p2c 6p4c 8p8c 8p2c etc. all pin bit crystal head, for all kinds of mold pressing all American, British, AMP and other non-standard crystal head. Is the telephone network jumper industry choice models, but also can be changed to the pressure of other products. AC220V, motor 60W90W, motor can be reversed, can be adjusted on the upper and lower mobile test. Do not dial after the head of the crystal to play the safety device, anti leakage configuration and other special functions
Power:
AC220V
Weight:12KG
distance of run:25mm
size:35*20*20mm
range:2P-8P
If no special requirement, we will send the machine with 8p8c
Attention:
1. Don't put your finger in the mould when the machine working.
2. Keep clear of the machine and
sufficient lubrication, it can last the longer working life of machine.
3. Don't press the leg board and make the continuous crimping function too long time. It's easy to break the mould.
It can press the ordinary PC connector, the British connector, American connector,
network
PC connector and so on;
2.No noise operation, In the operation the error is extremely few happened. The accuracy is high;
Operation way:
1.Make sure the power is 220V, single phase, plug in the power, the power indicator light
2.Turn to hand switch, adjust the height of the mold and die centrality, press the hand switch, adjusting the pressing needs of the product depth and centrality
3.Select mode of operation (pedal or automatic), the power switch to the continuous crimping switch.
4.Insert the core of wire orderly to rj45 connector, holding a wire to insert the rj45 connector into lower mould, and after upper mould pressed you need to pull out quickly.