Semiautomatic Rj45 Wire Crimping Machine,RJ45 RJ11 RJ12 Cable Crimper,4p ~10p10c

Description

Semiautomatic Rj45 Wire Crimping Machine,RJ45 RJ11 RJ12 Cable Crimper,4p ~10p10c
Featured:
1.The Rj45 terminal crimping machine is mainly used in crimping and connection for the telephone line, rj45 and so on. It can press the ordinary PC connector, the British connector, American connector, network PC connector and so on;
2.No noise operation, In the operation the error is  extremely few happened. The accuracy is high;
3.According to the rj45 connector's difference, the removable corresponding mold is optional, and changing the mold is simple in several minutes, does not need to maintain specially, the ordinary operator is competent.
4.The suitable mould is including 4P4C, 4P2C, 6P6C, 6P4C, 6P2C, 8P8C, 8P6C, 8P4C, 10P10C, British type, American, western-style, etc. And we can supply  4P4C, 4P2C, 6P6C, 6P4C, 6P2C, 8P8C, 8P6C, 8P4C, 10P10C.
If no special requirement, we will send the machine with 8p8c mould.
Operation way:
1.Make sure the power is 220V (
optional the Transformer/ Voltage Converter 220V to 110V)
, single phase, plug in the power, the power indicator light
2.Turn to hand switch,adjust the height of the mold and die centrality, press the hand switch, adjusting the pressing needs of the product depth and centrality
3.Select mode of operation (pedal or automatic), the power switch to the continuous crimping switch.
4.Insert the core of wire orderly to rj45 connector, holding a wire to insert the rj45 connector into lower mould, and after upper mould pressed you need to pull out quickly.
Caution:
1. Don't put your finger in the mould when the machine working.
2. Don't press the leg board and make the continuous crimping function too long time. It's easy to break the mould.
3. Keep clear of the machine and
sufficient lubrication, it can last the longer working life of macine.