CPAP/BiPAP Tube Cleaning System & Hanger

Description

Rinse, Soak & Dry! The CPAP/BiPAP Tube Cleaning System is a quick, easy and convenient tool for cleaning CPAP/BiPAP Hoses and Tubing. It also includes a handy hanger for soaking and drying tubes and for storing them when they're not in use!
FEATURES
Quick & Easy Cleaning Plus A Handy Storage Hanger
Works With All Standard Tubing & Many Specialty Tubes as Well
Includes Tubing Bridge, End Caps, Hanger Hook & Suction Cup
INSTRUCTIONS
Insert a Tubing End Cap into one end of the tube to be cleaned.
Fill the tube with a cleaning solution of your choice. We recommend Control III Cleaning Solution & Disinfectant; or a solution of mild soap and warm water.
Seal the other end of your tubing with the remaining End Cap
For a quick clean swish the cleaning solution, agitating it within the tube, to coat all surfaces. For a deeper clean hang the tube from the Tubing Bridge, with the end caps up and the tubing loop down, to allow the cleaning solution to thoroughly soak the inside of the hose.
Once cleaning is complete remove the Tubing End Caps and thoroughly rinse the hose with clean running water.
Hang your tube to dry by resting the tubing loop over the top of the Tubing Bridge with the uncapped endcaps hanging down. Snap the tubing into the pre-molded channels in the Tubing Bridge to lock it into place while drying.
Compatiblity:
Standard 22mm Tubing with Rubber Cuffs
- End Caps will fit snugly into the Rubber Cuffs; and Tubing will snap into the Tubing Bridge channels when hanging to soak or dry.
Slim 15mm Tubing with Rubber Cuffs
- End Caps will fit snugly into the Rubber Cuffs; however because Slim Tubing is thinner than Standard Tubing it will NOT snap properly into the Tubing Bridge. Tubing can still be hung over the bridge to dry but it may not hang properly to soak.
Heated 22mm Tubing
- In most cases Heated Tubing has specialized connectors at the "machine end" and standard connectors at the "mask end." End Caps will NOT fit the specialized connector end; but will generally fit the standard connector end. Heated 22mm Tubing should snap properly into the Tubing Bridge channels when hanging to soak or dry.
Heated Slim 15mm Tubing
- In most cases Heated Tubing has specialized connectors at the "machine end" and standard connectors at the "mask end." End Caps will NOT fit the specialized connector end; but will generally fit the standard connector end. Heated 15mm Tubing will NOT snap properly into the Tubing Bridge. Tubing can still be hung over the bridge to dry but it may not hang properly to soak.